'For a bit of maintenance while touring'
It doesn't matter whether you take your motorcycle out for long rides or if you just enjoy a few short trips; you can't avoid getting your bike and motorcycle clothing dirty. So there is a good chance you might also want to freshen up your helmet and motorcycle during a small pit stop. Putoline has come up with a great way to make the most of your refuelling and rest stops: The Travelkit! A handy and compact kit with 3 of the most essential necessities for a bit of maintenance: a helmet and visor cleaner, a ceramic chain wax OR a synthetic racing chain lubricant and a micro-fibre cloth.
The ultimate helmet and visor cleaner
Helmet Sanitizer is a hygienic, foaming helmet cleaner. The product is quick and easy to use. Cleans and neutralizes unpleasant odours in the helmet lining and leaves a fresh citrus smell. Helmet Sanitizer is also suitable for cleaning the helmet shell and the visor. How to apply? Hold Helmet Sanitizer upright and spray onto the helmet lining, shell, or visor. Then use the microfiber cloth to wipe it off.
Tech Chain, ceramic chain wax
Tech Chain (Ceramic Wax) is a modern, high-grade chain lubricant. The product contains a unique wax formula, sophisticated additives, and PTFE. Tech Chain provides optimal protection to the chain under all operating conditions. Suitable for sporting and professional use on both O-ring and MX chains.
DX 11 Chain Spray, synthetic racing chain lubricant
DX11 Chain Spray is a synthetic chain lubricant. The unique, water-repellent formulation penetrates deep into the chain links, leaves a protective layer, is super adhesive and is non-fling. It provides perfect protection against corrosion and wear, reduces friction, and is clean in use. DX 11 Chain Spray is suitable for high-performance levels in open, O-/X-/Z-ring chains on Road and Off Road motorcycles.
To sum up: The Travelkit provides you with the ease of maintenance on the go!
How to lubricate your motorcycle chain?
Continually lubricate the chain of your motorcycle after riding. First, spray the chain inside while slowly turning the rear wheel. Spray until the chain has gone round in full circle, so you are sure you have lubricated the whole chain. Please note that you must wait for at least 15 minutes after lubricating your chain before riding your motorcycle. This way, the spray can retract, which is good for the product's lifespan.
How to use The Travelkit?
We made a video about the correct use of The Travelkit. Watch it below.
Availability
The Travelkit is available now at one of our local dealers. You can find your nearest dealer by clicking here.
Already our Travelkit in your possession?
Please share your experience and tag us on Social Media
Questions?
We are happy to answer them.
Please send an e-mail to
marketing@putoline.com
or
technicalsupport@putoline.com.
We can also answer your questions on social media during office hours.